BTYVK - METEC CIRCUIT ETCH 9152, 19142

  • MSDS: BTYVK
  • Manufacturer: MACDERMID INC
  • Product Name: METEC CIRCUIT ETCH 9152, 19142
  • National Stock Number: 6850-00N048698
Product Identification

Product ID:METEC CIRCUIT ETCH 9152, 19142
MSDS Date:07/24/1986
FSC:6850
NIIN:00N048698
MSDS Number: BTYVK

Responsible Party
MACDERMID INC
526 HUNTINGTON AVE
WATERBURY, CT 06708
US

Emergency Phone: 203-575-5700;313-644-5626

Info Phone: 203-575-5700

Preparer: CHERRIE D. GILLIS

Cage: 1FK56

Contractor
MACDERMID INC
WATERBURY, CT 06702 US

Telephone: 203-575-5700

Cage: 1FK56

Ingredients

HYDROCHLORIC ACID

CAS: 7647-01-0

RTECS: MW4025000

Fraction By Weight: <5%

OSHA PEL 5 PPM, C

ACGIH TLV: 5 PPM, C

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IRRITATION TO SKIN-EYES AND MUCOUS
MEMBRANES. BURNS TO EYES. CHRONIC/LONG-TERM HEALTH EFTS UNKNOWN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES, CONTACT
PHYSICIAN. SKIN: WASH WITH PLENTY OF WATER. INGEST: DRINK WATER,
CONTACT PHYSICIAN. INHAL: REMOVE TO FRESH AIR. SUPPORT BRTHG (GIVE
O*2/ARTF RES P) .

Fire Fighting

Extinguishing Media:AS APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.

Accidental Release

Spill Release Procedures:WEAR PROTECTIVE CLOTHING. DISCHARGE DIRECTLY
INTO SEWERS/WATERWAYS. VENTILATE AREA. FLUSH WITH PLENTY OF WATER
AND NEUTRALIZE, DO NOT DISCHARGE TO SEWERS OR WATERWAYS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN COOL, VENTILATED AREA.
Other Precautions:AVOID EYE AND SKIN CONTACT-ALWAYS WASH CLOTHING
BEFORE RE-USE. AVOID ALL SKIN AND EYE CONTACT, KEEP CONTAINER WELL
CLOSED.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR SUITABLE FOR
AMMONIA.
Ventilation:LOCAL EXHAUST.
Protective Gloves:RUBBER.
Eye Protection:FACESHIELD.
Other Protective Equipment:RUBBER APRON/BOOTS. EMERGENCY EYE BATH .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:C1
Boiling Pt:B.P. Text:>300F,>149C
Vapor Density:>400F
Spec Gravity:1.39(H*2O=1)
Solubility in Water:COMPLETE
Appearance and Odor:DARK COLORED LIQUID
Percent Volatiles by Volume:40

Stability

Stability Indicator/Materials to Avoid:YES
INSOLUBLE IN ETHYL ACETATE.
Hazardous Decomposition Products:DISSOCIATES AT HIGH TEMPERATURE TO FE
CL*2 AND CL*2.

Disposal

Waste Disposal Methods:ALWAYS CHECK AND COMPLY WITH GOVERNMENT DISPOSAL
REGULATIONS. PRECIPITATE DILUTED SOLUTION WITH CAUSTIC SLOWLY.
FILTER. ADJUST PH=6-8. SEWER. DISPOSE OF I/A/W FEDERAL, STATE AND
LOCAL REGULATIONS (FP N).

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.